Chord Electronics Ltd is pleased to introduce the
CPA3000 as the next in the range of our new generation of pre-amplifier
products. Using similar technology as the highly successful CPA5000 reference
pre-amplifier the CPA3000 also features a high frequency switch mode power
supply and ultra low noise circuitry to give the very best noise floor
performance. Four pairs of balanced style XLR inputs allows for great
flexibility with two additional RCA inputs for unbalanced sources. A single
tape loop is available for playback and also to record from any of the
connected sources. Front panel controls allow for easy input and output
selection if required but changes can also be made via the supplied remote
control. Two polished and nickel plated aluminium controls feature prominently
to manually adjust the volume and the balance and give easy visual reference
of the settings. Using the precision motorised Alps potentiometers levels can
also be adjusted by remote control. All settings are clearly visible via the
large easy to read vacuum fluorescent display. The CPA3000 is feature rich
with the inclusion of fully balanced AV Bypass circuitry that allows for
direct connection to an AV processor at full signal level, routing the signal
directly from input to output avoiding the volume potentiometer. This gives a
truly flexible system for the purest two channel stereo reproduction
converting for use in a multichannel AV system with a simple press of a
switch. Cleverly situated under the main display, signal detection
indicators have been replaced with highly accurate VU meters. These give both
clear signal detection and accurate input level. Naturally via the front panel
control, these may be selected or disabled as required. Remote triggering
outputs are available at the rear of the unit to activate power amplifiers or
AV processors. These are active as soon as power is applied via the rear
switch. Packed with features and universal connectivity the CPA3000 also
features our trademark aluminium casework construction. This gives it stunning
looks and solid build quality to match. The CPA3000 is the ideal pre-amplifier for any system
