-
Myryad MXD4000 Digital
Pre-Amp/Processor.
-
The Myryad MXD4000 Digital Pre-amplifier
Processor has been designed to offer a combination of high quality audio and
video performance with simple yet elegant styling.
-
The Myryad MXD4000 can form the heart of a
high-end home cinema.
-
Digital-to-analogue conversion: 8 channels,
delta-sigma, 24bit 192kHz
-
Analogue-to-digital conversion: 2 channels,
delta-sigma, 24bit 96kHz
-
Stereo sources be sampled at 48kHz or 96kHz as
desired
-
24bit 96kHz capable digital inputs
-
Three HDMI digital video inputs - each assignable to
any of ten sources
-
Three component video inputs - each assignable to
any of ten sources
-
Six composite video and four s-video inputs - each
assignable to any of ten sources
-
Video transcoding (with OSD available on transcoded
video): - Composite to S-Video - Composite to component video (Y/Pb/Pr) -
S-Video to component video (Y/Pb/Pr)
-
Simple intuitive menu system for set-up
-
Comprehensive bass management: - Hybrid
digital/analogue bass management optimises dynamic range under all conditions
- Crossover frequency can be set between 20Hz and 200Hz in 5Hz steps -
Subwoofer can be fed a 'flat' signal to allow the sub's own filter to be
used
-
7.1 channel analogue bypass input
-
Analogue domain bass management on 7.1 channel input
Options: all Large, only LF/RF Large, or all Small. HPF crossover fixed at
80Hz, 2nd order
-
Loudspeaker distances can be set in feet or
metres
-
Lip sync correction (audio delay up to
150ms)
-
Five separate preset set-ups (speaker levels, bass,
treble and lip sync) can be stored and assigned to specific sources
-
Stereo analogue input sensitivities individually
adjustable
-
Analogue Monitor allows metering of stereo input
signals levels - with automatic setting of sensitivities if desired
-
Comprehensive control of remote trigger outputs from
a wide variety of controlling sources
-
Supplied with Universal Remote Controls' MX-700
remote, pre-programmed with all Myryad remote codes - including 'discrete'
codes not sent by other Myryad handsets.
-
RS-232 interface can be used both to control the
unit and to carry out the setup Two Xantech-compatible IR input
jacks
-
Second zone output: stereo audio plus composite
video
-
Smart My-LinkŪ communications to other Myryad
products
-
Inputs: 6 Stereo analogue, 4 Digital only (plus
video if assigned), 7.1
-
Multi-channel analogue (pure analogue bypass), 8
Digital (4 coax, 4 optical) - each assignable to any of 10 inputs, 6 Composite
video - each assignable to any of 10 inputs, 4 S-Video - each assignable to
any of 10 inputs, 3 Component video (HDTV compatible) - each assignable to any
of 10 inputs, 3 HDMI digital video - each assignable to any of 10
inputs
-
Outputs: 1 Stereo tape record, 1 Stereo Zone B, 7.1
Multi-channel analogue line outputs, 1 Digital (optical), 4 S-Video, 3
Composite video, 1 Composite video Zone B (without OSD), 1 Component video
(with OSD), 1 HDMI digital video (without OSD) Other: 2 My-Link
input/output, 3 12V DC trigger outputs (three independent channels), 1 RS-232
control input, 2 IR inputs - Xantech compatible
-
Processing capability: Dolby1 Digital, Dolby Digital
EX, DTS2, DTS 96/24, DTS-ES Matrix 6.1, DTS Neo:6 (Cinema and Music), DTS-ES
Discrete 6.1, Dolby Pro Logic, Dolby Pro Logic II/IIx (Music and Movie),
Surround 6.1, Synthesised surround modes, Dolby 'late night' compression,
extensive bass management modes, Stereo, Mono, Cinema Eq
-
Dimensions: (W x H x D) 436 x 95 x 343mm
-
Weight: (net) 7.0 kg
-
Fascia: 9mm anodised bead blasted aluminium in
anodised silver
Your payment will be processed via encrypted links to high secure systems run by reputable companies. More Info...
